QA

Question: What Goes Under Ceramic Floor Tile

Underlayment is something you put on top of your substrate to prepare it for tiling. The substrate (or subfloor) is the ground, whether it’s made of plywood or cement. Cement board or backer board are the most standard underlayments.

What do you put underneath ceramic tile?

1. Backer Board. This is the industry standard most preferred by construction pros when installing ceramic or porcelain tile. Backer board comes in four-foot-by-eight-foot and three-foot-by-five-foot rigid panels that contain a combination of cement, fiberglass, and sometimes crushed glass particles.

Does ceramic tile need underlayment?

Some people usually ask themselves if porcelain tiles need underlayment, well yes, they do. For your porcelain tile to last for long, you need an underlayment. Both porcelain and ceramic tiles are rigid, so if they are installed on surfaces that are not flat, they can crack easily.

What is underneath a tile floor?

A subfloor is the bottom-most structural level of your floor. It supports your decorative floor finish, whether it’s carpet, hardwood, vinyl, laminate or tile. The subfloor must be able to hold the weight of the tile and preparation materials required to complete the installation.

What goes between subfloor and tile?

On a plywood subfloor, you need either a layer of cement backer board or an underlayment membrane, like Custom Building Products’ Wonderboard and RedGard, between the subfloor and tile for the thin-set adhesive to achieve a good bond.

Can you lay tile directly on plywood?

Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.

Can you lay tile directly on concrete?

A: It’s perfectly acceptable to put tile directly on concrete — with a couple of caveats. First, it is important to determine if there is moisture coming up from the slab. Those products should help prevent any cracks in the slab from damaging the newly installed tile.

Do you have to put cement board under tile?

Whenever you’re laying tile on a wood subfloor, you need to first install cement backerboard to prevent leaks and water damage that could harm your flooring and the structure of your home. Unlike wood or drywall sub-surfaces, cement backerboard will not rot, warp or grow mold and mildew when exposed to water.

Do I need a vapor barrier under tile flooring?

A moisture barrier helps control the water vapor’s movement to help protect your floors. Therefore, if you’re installing floors in an area that sees moisture, even a little, a vapor barrier is needed.

What needs to go under tile?

What is an Underlayment? Tile may be strong, but it needs a solid, supportive base. An underlayment is the solid stabilizing layer directly below the tile and the tile adhesive (usually a thinset mortar).

Do I need Thinset under backer board?

However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used. Thinset is going to create a solid surface under tile and prevent flexing that could lead to cracking.

Do I need to seal plywood before tiling?

This expansion gap should be filled with a silicone sealant to prevent it from being filled with tile adhesive when fixing your tiles. Before fixing your plywood overlay, ensure the reverse and edges of the boards have been sealed using BAL Bond SBR neat, as this reduces water permeability.

How thick should plywood be under tile?

The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.

Can you tile 1/2 plywood?

To accommodate the 1/2 inch difference in floor heights, purchase or cut a transition strip of hard wood. According to the three most prevalent manufacturers of backer board in the US, no, 1/2″ ply is not acceptable. All of them require at minimum 5/8ths plywood.

What do you put on concrete floor before tiling?

Level. Use floor leveling compound for large holes or flaws in your cement floor. The compound is a cement-based material that is thick enough to stay where it needs to be, but also flows well to fill in depressions to ensure your floor is flat.

Does mortar stick to concrete?

Concrete slab was the foundation, original tile installation had mortar applied directly to concrete slab. Concrete, mortar or similar materials are not designed to stick or bond to old surfaces. You will not get any satisfactory results if you simply add new mortar to old.

Can you put tile on drywall?

As long as your wall is smooth and flat, you can install a ceramic tile kitchen backsplash directly over drywall or plaster with no problem. Start by cleaning the wall to remove any grease, then apply thin-set adhesive, and set the tile. After the adhesive has set, apply grout, and you’re done.

What can I use instead of cement board?

Glass mat gypsum board is a better choice. Sheets of glass mat gypsum are made from water-resistant silicone-treated gypsum, reinforced on both sides by fiberglass mats. DensShield is one common brand. It is easier to cut than cement board, it is mold resistant, and it has a built-in moisture barrier.

Can you put tile on drywall in a shower?

You can tile over drywall in areas that are not exposed to excessive moisture, and it is safe. It is not safe to tile over drywall in areas that are exposed to wetness like in the shower. Water in these areas can eventually seep behind the tile and cause damage, mold, or pest infestations.

Can you tile over a damp floor?

Short Answer: Yes, you can tile a damp basement if it’s rising damp, but it’s very important to use breathable tiles, such as unsealed quarry tiles or natural stone tiles that have been treated with a water-based sealer, such as LTP Mattstone H2O.

Is tile a vapor barrier?

While laying tile on a basement floor may slow down water vapor seeping from the concrete basement floor into the finished basement, it cannot serve as a vapor barrier.

Should I put a vapor barrier on my basement floor?

For a dry, mold-free finished basement floor, always install a vapor barrier before laying a wood subfloor or carpet pad. Any kind of persistent moisture will allow mold to get a foothold and soon ruin carpet or wood flooring. For below-grade slabs, assume that the concrete floor will get damp at some point.