QA

Quick Answer: How Much Is Fill Dirt

Topsoil prices range from $10 to $50 per yard, fill dirt costs $5 to $25 per yard, and the cost of sand is $15 to $50 per yard, including delivery.Cost of Fill Dirt, Sand & Topsoil Delivery. Material Cost Per Cubic Yard Fill Dirt $5 – $25 Screened Loam $18 – $26 Sand $15 – $50 Compost $20 – $50.

How much is a dump truck load of dirt?

Dump trucks can usually carry about 10 to 14 cubic yards of dirt. To understand what a cubic yard looks like, it’s easiest to think of one as a block of material around 3 feet in length, height, and width.

How do I calculate how much fill dirt I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.

How much is a truck of soil?

How Much Is a Truckload of Dirt? Expect to pay between $150 and $450 for a truckload of fill dirt, including delivery. One truck will typically hold 10 to 13 cubic yards of material.

How much dirt can a 1/2 ton pickup carry?

The volume of a pickup bed is far more than what the half ton could hold if filled with dirt. Common dirt will average about 2200 lbs a cubic yard. So the truck can typically handle a little less than half a yard. People will often put a full yard in a half ton truck.

How many yards of dirt can a dump truck carry?

Dump Truck Cubic Yardage – The Basics While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.

How much dirt do I need to level my yard?

Calculate How Much Soil You Need Convert the inches you need for soil depth into feet. Example: 3″ of soil (3″ ÷ 12″=.25′) Multiply the length by the width by the depth of soil needed. Divide the cubic feet by 27 (that’s the number of cubic feet in one cubic yard). Round off your answer to 1.4 cubic yards.

How much will a ton of soil cover?

1 tonne of packed topsoil measures roughly 24.7 cubic feet- that’s just under 3 feet along each plane- much heavier than it looks! Got any more questions about topsoil? Contact our team to learn more about how topsoil can help your garden prosper.

How much soil do I need to fill a 4×8 raised bed?

For a 4×8 raised garden bed, you will need 15 bags of soil (1.5 cubic feet per bag) or 21.44 cubic feet of soil. This is assuming your raised garden bed is 8 inches high and the bags of soil you are buying contains 1.5 cubic feet of soil per bag.

What is a yard of dirt?

For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt. 3 feet equals 1 yard, so 9 feet equals 3 total yards in length. The width of 3 feet equals 1 yard.

How much topsoil do I need for 1000 square feet?

Prepared topsoil can be spread over existing soil and immediately used as the medium for any type of planting, including bushes, trees, sod, seed, flowers, etc. Rate: 3 CY per 1000 sq ft (equal to 1″ of soil) • Example: The area for top dress or fill is 10,000 sq ft.

Will 2 yards of dirt fit in a pickup truck?

Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel. Small Pickups and Trailers: Can usually handle 1 cubic yard of soil to maybe 1½ of mulch.

Can a RAM 1500 carry a yard of dirt?

payload and standard pickup trucks (F-150, Silverado, Ram, etc.) have approximately 1500 lb. payload. They should be able to handle one scoop of a heavy aggregate or 1.5-2 scoops of a soil mix. Depending on the length of the truck bed, these trucks should be able to hold 2-4 scoops of a mulch or compost.

How much dirt can a Chevy 1500 hold?

The bed of a full size standard pickup has dimensions of: 8′ long X 5.33′ wide X 1.5′ high. When loaded level full, a truck of this size will hold 2.5 cubic yards of material.Full Size Pickup Truck. Depth of material loaded in pickup bed Capacity 3.8 inches deep ½ cubic yards.

How many tons are in a yard?

Cubic Yard to Ton Register Conversion Table Cubic Yard [yd^3] Ton Register [ton Reg] 1 yd^3 0.27 ton reg 2 yd^3 0.54 ton reg 3 yd^3 0.81 ton reg 5 yd^3 1.35 ton reg.

How do you calculate the volume of a dumper?

Divide the volume you have just calculated in cubic feet by 27. The resulting number is the volume of the dump truck, expressed in the standard for such ratings, cubic yards.

How much space is a yard?

Under the United States’ Customary System, 1 yard is equal to 3 feet or 36 inches. And a cubic yard is the volume of material that fits in a space that is 1 yard wide by 1 yard deep by 1 yard high. This is important because quite a few common materials are measured in cubic yards — here are some of them: Concrete.