Table of Contents
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. Turn off the water supply to the toilet using the water valve that typically extends from the floor or the base of the wall behind the tank.
Are toilet bowl tanks interchangeable?
Final Notes. When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
How much does it cost to replace a toilet tank?
A replacement tank will range from $50 to $100, not including the labor to install it. A professional plumber can put in a new tank in 1-2 hours for a total cost of $45 to $300. Total project price will depend on minimum charges as well as whether the internal tank parts also require replacement.
How do you replace a toilet tank?
How to Replace the Tank on Your Toilet Step 1: Disconnect the Toilet from the Water Supply. Step 2: Drain the Water from the Toilet Tank. Step 3: Disconnect the Supply Hose on the Toilet Tank. Step 4: Extract the Bolts on the Toilet Tank. Step 5: Detach the Tank from the Toilet Bowl.
Can you put a new tank on an old toilet?
Toilet tanks are sold separately from the bowls, so you can get any tank that fits onto your model of toilet. When you need to replace a toilet tank, drain and unscrew the old one to remove it. After getting your new tank, put in the hardware to waterproof it and then secure it in place.
Can you mix and match toilet bowl and tank?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How do I measure for a replacement toilet tank?
A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
How long does it take a plumber to replace a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
How often should you replace the wax ring on a toilet?
It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced. The telltale sign of wax ring failure is water leaking out from around the base of the toilet.
Why is my toilet leaking from the bottom of the tank?
One reason for a toilet leak from the base might be a loose connection where the tank meets the toilet. Shut off the water at the valve then flush and hold the handle until all the water has drained from the tank. Remove the old bolts and washers. Clean and dry the area then install new washers and bolts.
Why is my toilet tank not filling?
When a toilet is not filling up with water, it is a sign of a faulty fill valve, wrong height of the toilet float, a leaking flapper, cracked overflow tube or low water pressure. When the toilet tank won’t fill at all after flushing, make sure the shutoff valve is fully open.
What causes a toilet to leak from the tank?
The most common cause of a leaking toilet tank is when the flapper fails to seat properly and form a tight seal against the valve seat. This lets water leak from the tank into the bowl. It may be caused by the flapper being out of position. If the water level has fallen below your mark, the flush valve is leaking.
How do you insulate a toilet tank?
“Any type of insulation layer between the water and toilet tank will reduce the amount of condensation on the outside of the tank,” he says. Tuck sheets of repurposed bubble wrap around the inside perimeter of your toilet tank, or use an insulation kit like this one by Plumb Pak.
What are the guts of a toilet?
There are really only two main toilet tank parts: The toilet flush valve, which lets water gush into the bowl during the flush, and the fill valve, which lets water refill the tank after the flush. When a toilet runs constantly or intermittently, one of these valves is usually at fault.
Are Kohler toilet parts interchangeable?
Will another brand of parts fit my Kohler toilet? Fortunately, yes. A commonly known aspect in plumbing is that Fluidmaster actually makes the parts for Kohler toilets. Sometimes they are rebranded and built to the specs for Kohler’s requests, but the innards are the same!May 15, 2015.
Are toilet seats universal?
Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying. There are three types of toilet shapes commonly found in UK homes. These are the traditional pointed-nose, D-shape, and round-nose seats.
Are all toilet tank lids the same size?
EVERY toilet tank lid is unique and there isn’t any other in the world exactly the same because porcelain tank lids shrink a lot and all warp slightly while being fired in a kiln at high temperatures. For the most common toilet tank lids we do charge less than most.
Are toilet repair parts universal?
The toilet fill valve and flapper are included in most universal toilet tank repair kits.
How much should it cost to have a toilet installed?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
Can a handyman replace a toilet?
Minor plumbing If you are in desperate need of stopping a constantly flushing toilet or leaks, a handyman can take care of this for you. If the plumbing issue is more complex than a leak or you need a toilet repaired, that’s when it’s time to call in the professional plumber.
Do you need a plumber to replace a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
How often should you replace your toilets?
How Long Do Toilets Last? Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How much does it cost to replace a toilet tank?
A replacement tank will range from $50 to $100, not including the labor to install it. A professional plumber can put in a new tank in 1-2 hours for a total cost of $45 to $300. Total project price will depend on minimum charges as well as whether the internal tank parts also require replacement.
Can you put a new tank on an old toilet?
It is unlikely that tanks will be interchangeable if you replace a toilet tank with one from a different manufacturer. Problems with mismatched tanks and bowls include hardware not lining up and poor balance on the bowl. Even if the bolts line up, the new tank may leak or be wobbly.
How do you replace a toilet tank?
How to Replace the Tank on Your Toilet Step 1: Disconnect the Toilet from the Water Supply. Step 2: Drain the Water from the Toilet Tank. Step 3: Disconnect the Supply Hose on the Toilet Tank. Step 4: Extract the Bolts on the Toilet Tank. Step 5: Detach the Tank from the Toilet Bowl.
What are the guts of a toilet?
There are really only two main toilet tank parts: The toilet flush valve, which lets water gush into the bowl during the flush, and the fill valve, which lets water refill the tank after the flush. When a toilet runs constantly or intermittently, one of these valves is usually at fault.
Are Kohler toilet parts interchangeable?
Will another brand of parts fit my Kohler toilet? Fortunately, yes. A commonly known aspect in plumbing is that Fluidmaster actually makes the parts for Kohler toilets. Sometimes they are rebranded and built to the specs for Kohler’s requests, but the innards are the same!May 15, 2015.
How long does it take a plumber to replace a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
How often should you replace the wax ring on a toilet?
It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced. The telltale sign of wax ring failure is water leaking out from around the base of the toilet.
Why is my toilet tank whistling?
The toilet whistling is associated with the toilet fill valve. The fill valve has a float that rises and falls with the water level, regulating the water entering the tank after a flush. When the float drops low, the valve opens to let the tank refill. Whistling is usually the beginning of the problem.
How do you insulate a toilet tank?
“Any type of insulation layer between the water and toilet tank will reduce the amount of condensation on the outside of the tank,” he says. Tuck sheets of repurposed bubble wrap around the inside perimeter of your toilet tank, or use an insulation kit like this one by Plumb Pak.
Where is the toilet model number?
Toilet model numbers are located in a variety of places on the product. One-piece toilet: The model number is located inside the tank. Two-piece toilet: Model numbers are found inside the tank and the bowl, and are specific for those parts of the toilet.
Why is my toilet tank not filling?
When a toilet is not filling up with water, it is a sign of a faulty fill valve, wrong height of the toilet float, a leaking flapper, cracked overflow tube or low water pressure. When the toilet tank won’t fill at all after flushing, make sure the shutoff valve is fully open.
How much water should be in your toilet tank?
It needs to be high enough for complete flushes, but it should be below the top of the overflow pipe. The tank should have a colored or molded water level mark. The rule of thumb is to set the water level about ¾” below the top of the overflow pipe.
Do toilet tanks come with guts?
A toilet kit comes with parts needed for common repairs. The parts of a toilet tank are: Handle: Located outside the tank, this is used to manually flush the toilet. On dual flush models, the flush handle is sometimes replaced by two buttons on top of the toilet tank.
Are toilet flappers universal?
A universal sized toilet flapper used to be the norm, but today toilet flappers can range anywhere from 2″ to 4″ in size. The size of the flapper that your toilet uses usually is determined by a couple of factors. More recently manufactured toilets tend to use 3″ or 4″ flappers, as opposed to 2″ flappers.
Are toilet flush valves interchangeable?
They really actually all do the same job but operate slightly different. Most toilets are the same so it is just the mechanism’s that are different. The part of the toilet that stores the water is called the cistern and these will have in generally a 2” opening at the bottom to which the 1 ½” siphon sits into.
What is the difference between Kohler GP1138930 and GP1083167?
The GP1083167 fill valve has a red cap and can replace any valve with a red or yellow cap. The GP1138930 universal fill valve has a white cap and can replace most other KOHLER® fill valves.
