QA

Quick Answer: Are Toilet Tanks Universal Fit

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.

Can you mix and match toilet bowl and tank?

There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.

Are toilet tanks a standard size?

Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.

Can you replace a toilet tank with a different brand?

It is unlikely that tanks will be interchangeable if you replace a toilet tank with one from a different manufacturer. Problems with mismatched tanks and bowls include hardware not lining up and poor balance on the bowl. Even if the bolts line up, the new tank may leak or be wobbly.

How do you know if a toilet tank is compatible?

Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.

How much does a new toilet tank cost?

Tank. A replacement tank will range from $50 to $100, not including the labor to install it. A professional plumber can put in a new tank in 1-2 hours for a total cost of $45 to $300.

Can I just replace my toilet tank?

Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. Turn off the water supply to the toilet using the water valve that typically extends from the floor or the base of the wall behind the tank.

What are the standard dimensions of a toilet?

Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.

Are all toilet tank lids the same size?

EVERY toilet tank lid is unique and there isn’t any other in the world exactly the same because porcelain tank lids shrink a lot and all warp slightly while being fired in a kiln at high temperatures. For the most common toilet tank lids we do charge less than most.

What is the standard size of a toilet room?

The International Residential Code (IRC) sets the required minimum dimensions of a toilet room at 30 inches by 60 inches. However, for increased comfort and accessibility, the National Kitchen and Bath Association suggests a minimum of 36 inches by 66 inches.

How do I measure for a replacement toilet tank?

A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.

What are the guts of a toilet?

There are really only two main toilet tank parts: The toilet flush valve, which lets water gush into the bowl during the flush, and the fill valve, which lets water refill the tank after the flush. When a toilet runs constantly or intermittently, one of these valves is usually at fault.

How do I find the color of my toilet?

The color. The brand: Look under the water tank lid (on the bottom); on the inside walls of the tank; on the bowl between the bolts attaching the seat. Disregard names on the seat as they are seldom the same brand as the toilet.

Is my toilet round or elongated?

To know whether your toilet is round or elongated measure the length of the bowl from between the seat mounting holes to the front of the bowl. If you get around 18.5 inches then it is elongated. A round toilet bowl will have a length of about 16.5 inches.

Why is toilet tank not filling up?

When a toilet is not filling up with water, it is a sign of a faulty fill valve, wrong height of the toilet float, a leaking flapper, cracked overflow tube or low water pressure. When the toilet tank won’t fill at all after flushing, make sure the shutoff valve is fully open.

Are Crane toilet tanks interchangeable?

A. When searching for replacement parts for your toilet, it is most important to find the TANK number to ensure the parts are a good match. Because of Crane’s unique “mix & match” system, as long as your tank number matches, you should be good to go even if the bowl doesn’t look exactly the same.

Where is the toilet model number?

Toilet model numbers are located in a variety of places on the product. One-piece toilet: The model number is located inside the tank. Two-piece toilet: Model numbers are found inside the tank and the bowl, and are specific for those parts of the toilet.

How much does a plumber charge to replace a toilet?

A plumber charges around $375 to replace a toilet. Most charge between $275 and $480. This includes the cost of removing and disposing of your old toilet. Note that the actual cost to replace a toilet depends on your location, the type of toilet and the difficulty of the installation.

Can a handyman replace a toilet?

Minor plumbing If you are in desperate need of stopping a constantly flushing toilet or leaks, a handyman can take care of this for you. If the plumbing issue is more complex than a leak or you need a toilet repaired, that’s when it’s time to call in the professional plumber.

Can you put any toilet tank on a toilet?

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.